Dark Comet RAT Untouched [v5.3] Free Download And Tutorial

Desclaimer : This is just for educational purpose and not intended to do hurt anyone or for illegal purposes.Using RAT without permission of system owner or Administrator is Crime

Tried everything but no connections ?

Want to check if his works or not ?

Comment below and we Will contact you ..! 

DarkComet RAT 

DarkComet 5.3 version is considered to be most stable version as this project is not supported anymore and there are too much of fake programs mostly binded on internet so i thought it would be helpful for you people .

DOWNLOAD

If you guys know a bit about this then you must know that the latest versions of DC ( Legacy Versions ) just screw you up because it doesn't has the "Build Server" option (!) shocking , isn't it ? Probably to make it legal .So I am giving you this older version of DC which has the option (as like in the image below ).I hope you know how to set it up.

Note : In order to use this rat you have to disable your antivirus or any other security program otherwise it will got deleted . Antiviruses must detect it because it is an hack tool .. ;) 

NOTE : This tutorial is just for educational purposes .I am not responsible for anything that you do with it . REMEMBER using a rat on  someone else computer without their permission is CRIME .

Tutorial Courtesy ultimatepeter 

Download it from above link.

A TOS should show up.

Tick the box saying ‘Do not display again the EULA‘ that is located at the bottom left. 
Click ‘I accept‘  

• At the bottom left, it will show up a Help Screen, tick ‘Do not show at startup‘ then click ‘Fine‘
• Click DarkComet-RAT at the top left.
  
• 
  
• Click ‘Listen to new port (+Listen)‘
  
  A new window should open, put in your Port then tick ‘Try to forward automaticaly (UPNP)‘
  
  IN this case, I will do port 70 so I put that in, tick ‘Try to forward automatically (UpNP)‘ and click Listen.
• Move over to ‘Socket / Net‘ located at the very end of the top left border.
  
  You should see something like this:
  
  70 may not be your port, your port that you added in ‘Listen to new port‘ will be displayed, not specifically 70.
• Go to ‘www.canyouseeme.org‘
  
• Put in the port that you are listened on.
  If all went well, it should look like this:
  
• Now, click DarkComet-RAT again and click Server Module, then click Full Editor (Expert)
  
• Name your Security Password anything you like, then click the Mutex a few times. We then have the Main Settings done.
  
  Make sure you untick FWB (Firewall Bypass)
• Go to Network Settings.
  Now, go to http://www.no-ip.com and register
  Click Free DNS
  
• Put in whatever you want for it. Make sure the email is valid because we will need it to validate. (if you don’t want to give your email, get a temp email at 10minutemail.com)
  
  Sign in now.
• Now, at the Body you will see a list of options, click ‘Add Host’
  
• Copy the settings:
  
  Leave IP Address, as that will show as Default your IP address.
• Click Create Host.
• Go back to your DarkComet and put in the Ip/DNS and Port (DNS for the NO-IP you made a second ago and Port for the one you listened on!)
  
• Then click ‘Add‘ and go to Module Startup.
  Tick the ‘Start the stub with windows (module startup)’
  Then leave everything but ‘Persistance installation ( always come back )‘
  Tick that.
  Now, it should look like this:
  
•  Now go to ‘Stub Finalization‘ at the end.
  If you are going to get it crypted then don’t tick UPX (Ultimate Packer Executable) but if you are, I would leave it off and just have it on No compression.
  
• Now tick the ‘Save the profile when stub succesfully generated’ and Build the Stub.
  Now there is one last thing.
• Go to the Client Settings in DarkComet-RAT and then Click NO-IP Updater
  
• Then put in the NO-IP host, Username and Password, then tick ‘Auto update your no-ip dns when your IP change‘
  
• Now, run the stub that you generated in a Sandbox to test, and you should show up!


Here now, we have run through the entire thorough setup for DarkComet. Even your kid brother could follow this tutorial.